Jackson Auto Machine Racing Engines

Jackson Auto Machine has extensive "In-House" services for customers. From custom engine designs to welding repair services.

Crankshafts

• Custom Lightening
• Knife edging
• Repair-Welding
• Micro-polishing
• Magnaflux Inspection
• Custom Grind
• Shot-peen
• Straightening

Pistons

• Pin-fit Pin Bores
• Machine Flats
• C.C. Domes of Pistons
• Hand finish Domes
• Balancing
• Glassbeading
• Flycut for Valve Clearance
• Custom Piston Design Services
• Ceramic Coating

Connecting Rods

• Magnaflux Inspection
• Beams Polished
• Balancing of Rod
• Alignment of Small to Big End
• Shot Peening
• Complete Reconditioning of Big End
• Bore & Bushing for Floating Pins
• Remove and Install Pistons
• Re-Bush Pin End

Cylinder Heads

• Pressure Testing
• Magnaflux Inspection
• Machining for Over Size Valve Springs
• Machining for Performance Valve Stem Seals
• Damaged Threads Repaired
• Angle Milling
• C.C. of Chambers & Ports
• Competition Valve Work
• Receiver Grooves Installed
• Glass Beading
• Bronze Wall Guides Installed
• Flow Bench Testing
• Port Match & Bowl Blend
• Full Competition Port & Polish
• Machining for Oversize Valves
• Install Valve Seats & Guides
• Machine Head for Jessel Rockers
• Install Screw-in-Studs
• Custom Welding
• Welding Repair
• CNC Race Porting
• Receiver Groove Mated to Block
• Cylinder Head Welding Repair Services
• Custom Hand Porting

Engine Block

• Cylinder Boring
• Degreasing of Cast or Aluminum Blocks
• De-burr & Relieving
• Torque Plate Hone
• Bore & Bush Lifter Bores
• Parallel Decks Using BHJ Fixtures
• Install Cam Bearings
• Align Hone Mains
• Install Galley Plugs
• Install 4-Bolt Caps
• Final Wash Block for Assembly
• O-ring Decks
• Install Sleeves in Block
• Magnaflux & Pressure Testing
• Install Helicoils in Block
• Machine for Stroker Clearance
• Inspection Block
• Machining for Connecting Rods
• Glassbead Block
• Sonic Testing Cylinders, Decks

Precision Assembly

• Balance Complete Rotating Assembly's
• Balance Flywheels
• Balance Clutch Assembly's
• Match Balance Mis-Matched Components
• Blueprinting

Cleaning and Prep Services

• Hot Tank Cleaning
• Jet Washing
• Aluminum Cleaning
• Glass Beading
• Shot Peening

Research and Development

• Custom Cylinder Head Porting and Polishing
• Custom Intake Manifold Porting
• Custom Intake Manifold Design
• Carburetor
• Flow Bench Testing
• Custom Length Pushrods
• Custom Piston Design Services
• Combustion Chamber Molds
• Custom Built Crankshafts
• Sheet Metal Intake Manifold Design & Fabrication

Engine Dyno Testing

• Baseline Runs
• Engine set-up and Configuration

Welding Services

• Aluminum Cylinder Heads
• Intake Manifolds
• Custom Fabrication